- Class-D power amplifier in PWM technology for 70 V, 100 V or 4 Ohm loudspeakers
- Properties better than IEC 268.3
- Automatic switching between mains and emergency power operation
- Full output power in emergency power operation
- Rear power switch (inrush current limitation)
- Short-circuit proof
- Interchangeable input modules with adjustable input sensitivity
- Internal processor-controlled fault monitoring
- Power outputs with plug-in control
- Signalling outputs for earth faults and power amp faults
- Backup amplifier input
- Inputs for standby and backup switching
- Signal and clip display via LEDs on the front panel
- Front status and fault display via LEDs
- Rated voltage (mains operation) 230 VAC / 50 Hz
- Rated current 5.9 A
- Output power 2x500 W
- Power consumption with mains operation at rest 20 W
- at rated power 1,320 W
- Operating voltage (emergency power operation) 24 VDC
- Power consumption (emergency power operation) at rest 9.6 W
- at standby 1.6 W
- at 1/8 power (speech / music) 170 W
- Frequency response (-3 dB/-3 dB) 80 Hz – 20 kHz
- Part of the EN54-16 certification
Products voice alarm systems
100 V power amplifier 2x500 watts, 2HU
Class-D power amplifier, 230VAC and 24VDC, 100V, 70V or 8 Ohms
documents
-
Additional information and downloads on our products and services are available in the protected website area. A one-time registration is necessary to receive the
A one-time registration is necessary to receive the personal login data .
Product Information
Technical Specifications
Dimensions (H x W x D) | 19", 2HU, 345 mm depth plus connector |
Weight | 15 kg |
Material | Anodised aluminium |
Color | Black |
Certificates / Approvals
-
Additional information and downloads on our products and services are available in the protected website area. A one-time registration is necessary to receive the
A one-time registration is necessary to receive the personal login data .